Re: DC-SCM 2.0 pinout rev 0.95 available on the wiki


Wang, Qian
 

Yes, the 2nd eSPI0* instance with P1 designation could be used for the 2nd node.  We will look into removing the ‘0’ in the name, same for QSPI0*.

Thanks,

Qian

 

From: OCP-HWMgt-Module@OCP-All.groups.io <OCP-HWMgt-Module@OCP-All.groups.io> On Behalf Of Chris Scott via groups.io
Sent: Wednesday, September 15, 2021 4:39 PM
To: OCP-HWMgt-Module@OCP-All.groups.io
Subject: Re: [OCP-HWMgt-Module] DC-SCM 2.0 pinout rev 0.95 available on the wiki

 

In the dual-mode configuration, is eSPI_0 offered in two places on the connector, or is the 2nd instance (with the "P1" designation) supposed to be a 2nd eSPI interface? Please explain.

 

Thanks,

Chris

 


From: OCP-HWMgt-Module@OCP-All.groups.io <OCP-HWMgt-Module@OCP-All.groups.io> on behalf of Qian Wang via groups.io <qian.wang@...>
Sent: Monday, September 13, 2021 10:31 AM
To: OCP-HWMgt-Module@ocp-all.groups.io <OCP-HWMgt-Module@ocp-all.groups.io>
Subject: Re: [OCP-HWMgt-Module] DC-SCM 2.0 pinout rev 0.95 available on the wiki

 

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

 

 

On Mon, Sep 13, 2021 at 8:55 AM Qian Wang via groups.io <qian.wang=ocproject.net@groups.io> wrote:

Hello All,

 

This is the link for DC-SCM 2.0_pinout_rev0.95:

It is also posted on the wiki.  If you have any comments or questions, please let us know.

 

thanks,

Qian

Join OCP-HWMgt-Module@OCP-All.groups.io to automatically receive all group messages.